Pipe failure valve for installation in pipes
Description
Pipe failure valve NG10 for line mounting. The valve is screwed directly into the component which has to be protected. Thread size for port A: male G1/2". For port P: female G3/8" for type RBSG1012 or female G1/2" for type RBSW1012. This pipe failure valve is available in a straight version and in a 90° version. Housing and banjo bolt are zinc coated.
Application
Pipe failure valves are used where loads must be protected against uncontrolled lowering after a line rupture, for exemple in scissor lifts or leveling platforms. Caution: Pipe failure valves are nor suitable for appli-cations where pressure and flow changes rapidly under normal working conditions.
Key facts
Pipe failure valve
for installation in pipes
- Qmax = 30 l/min
- pmax = 210 bar
Contact us now
Do you have questions about this product or need help finding the best solution for your project? Our network of experienced sales experts is here to support you – personally, competently, and close to you.
To the sales network