Proportional throttle cartridge (slip-on-coil, integrated electronics) DNPPM33_ME

Proportional throttle valves, proportional flow control valves M33x2

Direct operated proportional throttle valve with integrated electronics as screw-in cartridge for cavity according to ISO 7789. With the solenoid deenergised, the control spool is held in the closed position by a spring. The change of the electric current is followed by a proportional volume flow change. Progressive increase and decrease of volume flow and reduced hysteresis are characteristics of this valve. The Plug & Play valves are factory set and adjusted and have therefore a high valve-to-valve reproducibility. The control takes place via an analogue interface or a fieldbus interface (CANopen, J1939 or Profibus DP). The parameterisation takes place by means of the free of cost parameterisation and diagnostics software «PASO» or via fieldbus interface. The USB parameterisation interface is accessible through a screw plug. As an option, these valves are available with integrated controller. As feedback value generators sensors with voltage or current output can be connected directly. The available controller structures are optimised for applications with hydraulic actuations.

Proportional valves Proportional throttle cartridge (slip-on-coil, integrated electronics) DNPPM33_ME

Proportional throttle cartridge with integrated electronics​

  • direct operated
  • Qmax = 65 l/min
  • QN max = 63 l/min
  • pmax = 350 bar

Application

Proportional throttle valves with integrated electronics are perfectly suitable for demanding applications in which the volume flow frequently has to be changed. They are used in applications where high valve-to-valve reproducibility, easy installation, comfortable operation and high precision are very important. The integrated controller reliefs the machine control and operates the volume flow control in a closed loop circuit. The applications are in the indust­rial as well as in the mobile hydraulics for the smooth control of hydraulic actuations. The screw-in cartridge is perfectly suitable for installation in control blocks and is installed in sandwich- ­(vertical stacked systems) and in flange plates (corresponding data sheets in this register). For machining the cartridge cavity in steel and aluminum blocks, cavity tools are available (hire or purchase). Please refer to the data sheets in register 2.13.​