Software to download
PASO2
The PASO2 parameterisation software enables the configuration and analysis of Wandfluh electronic products of type PDS1. All parameters can be adjusted directly on the connected device. The current device status and signal flow are displayed in real time. The user interface is based on
a signal flow diagram, making it intuitive and easy to use. All parameters are documented in the integrated help system. Parameters can be saved in files and transferred to other devices. The parameter files can also be created and edited offline, i.e. without a connected device.
System requirements
The following requirements must be met in order to install and use the software:
- Operating system: Windows 10 or higher
- USB cable: Type C for connecting the device
- Compatible product: PDS1 devices
Download & Installation
The PASO2 parameterisation software is provided free of charge by Wandfluh.
PASO (SD7, DSV, MD2, PD2, MKY)
The PASO parameterization software is used for the parameterization and diagnosis of all Wandfluh SD7, DSV, MD2, PD2 and MKY electronic cards. All settings can be easily made on the user-friendly interface.
Communication with the digital Wandfluh electronics is via a USB interface.
System requirements
In order to use the PASO parameterization software correctly, the following requirements must be met:
- Operating system Windows 7, Windows 10 or higher
- Graphics card standard VGA or higher, min. resolution 1425 x 800
- Min. 1 serial USB interface (USB 1.1 or USB 2.0)
- USB cable:
- Type A => Mini B for DSV
- Type A => B for all other devices
- USB adapter from Wandfluh PC - PD2 (only for communication with PD2 / MKY)
Download & Installation
The PASO software can be downloaded free of charge.
Installation is carried out by calling up the file ‘setupPaso.exe’. An installation programme then takes over the complete installation of PASO. This requires Windows Installer, which is normally part of the Windows environment. If this is not the case, Windows Installer can be downloaded from the Microsoft website.
If the PASO software is already installed on the device, an update will be performed automatically.