Solenoid coil with integrated electronics
The “DSV” electronics have been extended by the option of a 7-pole connector. This connector and its signal assignment correspond to the connection standards used in many places. The electronics are mounted fixed onto a solenoid coil and are used for simple control of a proportional valve. It can be slipped on practically all Wandfluh proportional valves as a slip-on coil. By its compact construction it fits also onto small NG4 valves or to screw-in cartridge valves. With IP67 protection, this "intelligent" solenoid coil can also be used in harsh environments. The electronics are optionally available with an integrated controller. As feedback value generators, sensors with voltage or current output can be connected. The available controller structures are optimised for use with hydraulic actuators. The control takes place via an analogue interface or a digital fieldbus interface (CANopen, Profibus DP). Parameterisation can be conveniently made with the free of cost parameterisation and diagnostics software PASO or via a fieldbus interface. The “DSV” electronics are always delivered installed onto the valve, are factory set and adjusted with the valve, in order to guarantee the highest valve-to-valve reproducibility. This means that exchanging a valve in the machine becomes a simple Plug and Play.
Further details can be found in data sheet 1.13-76.