Poppet valve in sandwich plate

30.03.2021

Poppet valve in sandwich plate

The poppet valve sandwich plate range is extended by a variant with a slip-on coil solenoid. With the seat-tight valve, flows up to 80 l/min and 350 bar can be switched. The coil voltage or the plug type can be easily changed using the slip-on coil principle. A corresponding valve variant is available for use in explosion-hazard areas of zones 1+2.

The solenoid-coil can be replaced without opening the valve. The valve and the sandwich plate are very well protected against rust by the zinc-nickel coated surfaces.

Further details can be found in data sheet 1.11-2547.