NEWS

Wandfluh has extended the proven roller valve with an execution for use in very corrosive environments. The valve is made from stainless materials and coated with high-quality surface protection. The valve can switch a volume flow of 60 l/min at up to 350 bar. The robust actuation roller can also absorb higher transverse forces and is very well protected against contamination. The direct operated…

The existing roller valve has been equipped with a more robust actuating mechanism and the hydraulic peak performances have been increased. The valve can now switch a volume flow of 160 l/min at up to 350 bar. The actuation roller can also absorb higher transverse forces and is very well protected against contamination and corrosion. The direct operated valve of nominal size NG10 is available as a…

Wandfluh has equipped the existing roller valve with a more robust actuating mechanism and increased the hydraulic peak performances. The valve can now switch a volume flow of 30 l/min at up to 350 bar. The actuation roller can also absorb higher transverse forces and is very well protected against contamination and corrosion. The direct operated valve of nominal size NG4 is available as a 4/2-way…

The spool valve makes it possible to switch flow rates of 160 l/min with up to 350 bar in the explosion protection zone with the highest hazard. The pilot control of the valve allows these large hydraulic powers to be switched with very low electrical power. The hydraulic control of the pilot valve can be internal or external via an additional connection plate or the mounting interface depending…