Hand lever for spool valves NG6 for explosion-hazard areas


Hand lever for spool valves NG6

The solenoid operated spool valves can now be equipped with an additional hand lever. The valve can be actuated manually in addition to normal electrical actuation. The hand lever can be used for both switching and proportional valves. The spool valve in NG6 allows to switch flows of max. 80 l/min with up to 350 bar in an explosion protection zone. For the valve actuation, the proven, certified according to ATEX / IEC Ex, solenoid coil of equipment group I + II is used. The valve can therefore be used in underground mining as well as in surface installations in zones 1+2. The switching valve with the designation WDYFA06_Z568 and the proportional valve WDBFA06_Z568 are available as a 4/3-way execution with the ISO 4401-03 mounting interface. The switching valve is also available in an impulse spool execution in which the switching position is held by mechanical detent.

Further details can be found in data sheet 1.3-37 for the switching valve and 1.10-89 for the proportional valve.