НОВОСТИ

Новинки

12.01.2021
Poppet valve in sandwich plate

The poppet valve sandwich plate range is extended by a version with a slip-on coil solenoid. The coil voltage or connector type can be changed easily. A corresponding valve variant is available for use in explosion-hazard areas of zones 1+2. The solenoid coil can be replaced without opening the valve.

Далее
01.12.2020
Factsheet 2-way slip-in cartridge valves C_ENxx

2-way slip-in cartridge valves are particularly compact logic valves for block construction. They enable a wide range of hydraulic functions to be implemented in the smallest of spaces for applications requiring high flow rates. The valves are installed in the control blocks in a bore standardised in accordance with ISO 7368 and closed with a cover in which the pilot valve is usually also...

Далее
10.11.2020
Stainless poppet valve in ex-protection execution

Wandfluh has extended the solenoid operated poppet valve cartridges with an execution for use in highly corrosive and explosion-hazard environments. The valve is made of stainless materials and is coated with a high-quality surface protection. It can switch volumes up to 40 l/min at up to 350 bar. In the closed position, the metal seat closes the valve practically leakage-free. The universally...

Далее
31.08.2020
Solenoid coil Ex-protection

The solenoid coil MKU has been extended with an additional approval for use in dust explosion hazardous areas. The solenoid coil is used for applications in explosive atmospheres where a corresponding protection class is required. It has explosion protection certificates for UL/CSA Class I / II & III Division 1 and Class I Zone 1 and Class II Zone 21. The coil can now be used in gas and dust areas...

Далее