PASO MD2 for Windows

General

The parameterisation software PASO MD2 (the "PASO") serves for the parameterising and diagnosing of all Electronic cards MD2 of the WANDFLUH AG company. The software provides a user interface, through which by means of a keyboard or a mouse all adjustments and settings can easily be carried out. The communication with the digital card take place through a USB-interface.

The PASO can only be utilised in connection with a digital control card MD2 of the Wandfluh AG company. It is necessary to carefully study the operating instructions of the connected digital control card beforehand.

An overview, which MD2 card type can be operated with which PASO version is located in the section version index at the end of this document.

A description of the different PASO versions is located in the file "history.txt". This file is located in the directory where the PASO will be installed.

System requirements

In order to be able to correctly utilise the PASO, an IBM-compatible PC with the following requirements has to be available:

• Processor Pentium 1, min 1GHz, min. 16MB RAM
  Recommended: Pentium 4, 2GHz or higher, 32MB RAM or more
• Free harddisk storage space of minimum 4MB, plus storage space for program files
• Operating system Windows 2000, Windows XP or Windows Vista
• Standard VGA or higher graphics card, minimum resolution 800 x 600 recommended resolution 1280 x 1024
• At least one USB interface (USB 1.1 or USB 2.0)
• USB cable type A => B, male/male

Installation

The PASO software can be downloaded via the Internet free of charge (Accompanying documents for Electronics) or on request delivered on an installation-CD.

The installation of the PASO is then carried out by executing the file "setupPasoMD2v2001.exe". An installation program takes over the complete installation of PASO. To them, the Windows Installer must be installed. This is normally a part of the Windows Environment. If not, please download it from the Microsoft Website.

If there is already a version of the PASO software installed on the PC, an update will automatically started.

The helpfiles are included in the setup and are installed automatically.

Version Index

For more informations please contact:

Wandfluh AG, Helkenstrasse 13, CH-3714 Frutigen
Tel. +41 33 672 72 72, Fax +41 33 672 72 12, e-Mail: sales(at)wandfluh.com