PASO DSV/SD6 for Windows

General

The parameterisation software PASO DSV/SD6 (the "PASO") serves for the parameterising and diagnosing of all Electronic cards DSV or SD6 of the WANDFLUH AG company. The software provides a user interface, through which by means of a keyboard or a mouse all adjustments and settings can easily be carried out. The communication with the digital card take place either through a USB-interface (SD6) or through a serial RS 232 interface (DSV).

The PASO can only be utilised in connection with a digital control card DSV or SD6 of the Wandfluh AG company. It is necessary to carefully study the operating instructions of the connected digital control card beforehand.

An overview, which DSV and SD6 card type can be operated with which PASO version is located in the section "version index" at the end of this document.

A description of the different PASO versions is located in the file "history.txt". This file is located in the directory where the PASO will be installed.

System requirements

In order to be able to correctly utilise the PASO, an IBM-compatible PC with the following requirements has to be available:

• Prozessor 486 or higher, min. 33 MHz, min. 8 MB RAM
  Recommended: 80586 66 MHz or higher, 16 MB RAM or more
• Free harddisk storage space of minimum 4 MB, plus storage space for program file
• Operating system MS-WINDOWS 2000 or XP
• Standard VGA or higher graphic card, recommended resolution 800 x 600
• For SD6: At least one USB interface (USB 1.1 oder USB 2.0)
• For DSV: At least one serial RS232 interface Notebooks without a RS232 interface, need an additional hardware like a PCMCIA-card => RS232 converter or a USB => RS232 converter
  to get the proper RS232 interface. Note: not all USB => RS232 converters work properly, if necessary we assist you with the choice of the right one.
• For SD6: USB cable type A => B, male/male
• For DSV: Serial RS232 cable 1:1 (RxD and TxD not crossed)

Installation

The PASO software can be downloaded via the Internet free of charge (www.wandfluh.com/Download => PASO DSV => Download Program files) or on request delivered on an installation-CD.

The installation of the PASO is then carried out by executing the file "setupPasoDSVvxxxx.exe", where "xxxx" means the current version (e.g. setupPasoDSVSD6v1514.exe, see also version index). An installation program takes over the complete installation of PASO. To them, the Windows Installer must be installed. This is normally a part of the Windows Environment. If not, please download it from the Microsoft Website.

If there is already a version of the PASO software installed on the PC, one can select if the existing version should be overwritten or removed.

The helpfiles are included in the setup and are installed automatically.

Version Index

For more informations please contact:

Wandfluh AG, Helkenstrasse 13, CH-3714 Frutigen
Tel. +41 33 672 72 72, Fax +41 33 672 72 12, e-Mail: sales(at)wandfluh.com